|
|
 |
ACE BACKSTAGE CO., INC. - STAGE POCKET SYSTEMS |
661-295-5760 |
 |
SPECIALIZING IN STAGE POCKET SYSTEMS SINCE 1991 |
 |
 |
 |
 |
"CONNECTRIX" RACK PANELS |
 |
ABOUT ACE BACKSTAGE CO., INC. |
|
 |
 |
 |
 |
 |
 |
| Standard |
Super |
Connectrix |
Specs |
Specs |
Specs |
 |
DESCRIPTION |
 |
|
Ace Backstage Co. Inc.'s Stock “CONNECTRIX” System Aluminum Rack Panels (#RPL-100, #RPL-200, and #RPL-300 Series) mean "CONNECTIVITY" using Neutrik® “D” Mounting Hole Patterns for greater flexibility.
“CONNECTRIX” SYSTEM RACK PANEL DESCRIPTION
The “CONNECTRIX” System expands connectivity possibilities utilizing a unique panel cutout detail and an array of standard and new isolated connectors. This system provides more connectors and mounting options in stock ACE Rack Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated rack panels with off-the-shelf stock prices and immediate delivery. The “CONNECTRIX” Rack Panels (#RPL-100, #RPL-200, and #RPL-300) are flat and strong. The Rack Panels are made from high strength aluminum alloy (6061-T6) that is .125” thick (1/8").
The “CONNECTRIX” Rack Panels are machined, powder coated, and in stock for immediate delivery. The panels may be preloaded with “CONNECTRIX” connectors and engraved with your specifications, creating a unique, customized panel with a short delivery time.
Using the “CONNECTRIX” System Rack Panel it is possible to mount various combinations of “CONNECTRIX” Connectors without a single custom punch. By implementing the #C-15100, #C-25100, or #C-26100 Series of connectors, ACE can create a custom Rack Panel that will work in most any installation application. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. All ACE “CONNECTRIX” System Rack Panels are stocked in standard EIA 1, 2, and 3 space 19" sizes and will mount in Standard EIA Rack Mounts.
Many pre-cut stock #RPL-100, #RPL-200, and #RPL-300 Series “CONNECTRIX” System Rack Panels are stocked and available for immediate loading and engraving. Standard "CONNECTRIX" Rack Panels are created from high strength, tough, aircraft aluminum alloy (6061-T6) that is 1/8" (.125") thick. The standard Rack Panels mount with (4) machine screws. Each panel is CNC machined to precisely mate with the designated connectors and in the rack mounting holes. Each Standard "CONNECTRIX" Rack Panel is finished with oven cured semi-gloss black powder coat.
Most rack panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished rack panels show bright aluminum in the engraved characters and need not be back filled. ACE standard rack panels are flat, strong, and rigid like the typical thinner mild steel panels. Because the panels are machined and not punched they stay flat and undistorted unlike punched panels which distort in the punching process. The machined “CONNECTRIX” cutouts combine popular mounting patterns of the Neutrik® “D” series and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors. The adapter mount is plastic and provides ground isolation between the panel and connector.
Using the “CONNECTRIX” system rack panel it is possible to mount any combination of modular jacks (RJ45, RJ11 etc.), BNCs, dual RCAs, mic jacks, speaker jacks and numerous other standard connectors without a single custom punch. This system provides for more connectors and mounting options in stock standard ACE rack panels. The benefit is faster order turn around and lower cost. Less custom fabrication for custom spec results with off-the-shelf stock prices.
|
|
|
|
|
|
SPECIFICATIONS |
|
|
• RPL-200 Data Specification Sheet (AutoCAD® dwg or dxf format)
• RPL-230 Data Specification Sheet (AutoCAD® dwg or dxf format)
• RPL-200 Series Rack Panel Connector Capacity = Up to 30 “CONNECTRIX” Connectors
• RPL-200 Series Panel Finish = Oven cured, semi-gloss, black powder coat
• RPL-200 Series Panel Material = 1/8" (.125") Thick Aluminum Alloy (6061-T6)
• RPL-200 Series Panel Size = 19.000” W x 3.500” H
|
|
|
|
|
|
CONNECTORS |
|
|
 |
| CONNECTRIX |
Stock "CONNECTRIX" CONNECTORS utilize Neutrik® “D” mounting hole pattern for greater flexibility.
Stock “CONNECTRIX” System Connectors may be used in any stock “CONNECTRIX” System Rack Panel(s). Utilizing the popular mounting pattern of Neutrik® “D” Series connectors with a generous rectangular cutout produces a growing array of adapter-mounted “CONNECTRIX” connectors. The adapter mount is plastic and provides ground isolation between the panel and connector. The current selection of stock “CONNECTRIX” system connectors is constantly changing, so please check out our current product information.
When ordering, please specify connector model number and type of connector as well as rack panel model number (#RPL-100, #RPL-200, or #RPL-300 Series Rack Panels) the connectors will be loaded into. Connectors are loaded into panels using black, aluminum pop rivets. You may also choose to have your connectors loaded with removable machine screws and locking nuts, for a nominal fee. *NOTE: Specific High Density (HD) and Sub-D pattern connectors will require either 2 or 3 “CONNECTRIX” Horizontal Spaces or 2 or 3 “CONNECTRIX” Vertical Spaces, depending on connectors selected.
|
|
|
|
|
|
RACK PANEL CAPACITY - #RPL-100, 200, and, 300 SERIES RACK PANELS |
|
|
• #RPL-100 Rack Panel accepts up to (10) "CONNECTRIX" Connectors
• #RPL-110 Rack Panel accepts up to (10) "CONNECTRIX" Connectors
• #RPL-200 Rack Panel accepts up to (30) "CONNECTRIX" Connectors
• #RPL-230 Rack Panel accepts up to (30) "CONNECTRIX" Connectors
• #RPL-300 Rack Panel accepts up to (45) "CONNECTRIX" Connectors
• #RPL-345 Rack Panel accepts up to (45) "CONNECTRIX" Connectors
|
|
|
|
|
|
INSTALLATION |
|
|
Stock "CONNECTRIX" System #RPL-200 Series Rack Panels mount with (4) four machine screws. Each panel is CNC machined to precisely mate with the designated connectors and in Standard EIA rack mounting holes. |
|
|
|
|
|
INCLUDES |
|
|
• (1) #RPL-200 Series Panel
|
|
|
|
|
|
ORDERING |
|
|
When ordering Rack Panels please specify the following:
• Rack Panel Model Number: Ex. - #RPL-230
• Rack Panel Model Series (size): Ex. - #RPL-200 Series "CONNECTRIX" Two Space Rack Panel
• Optional Connectors to be loaded into Panel(s): Ex. "CONNECTRIX" #C-15101
• Connector Position Reference Number (CPRN): Location of "CONNECTRIX" Connectors to be mounted into Rack Panel(s): Ex. - CPRN: 1 - 30.
• Connector Mounts: Black Aluminum Pop Rivets or removable machine screws & locking nuts
|
|
|
|
|
|
FEATURES |
|
|
FLEXIBLE CONNECTOR MOUNT: RPL-200 Series "CONNECTRIX" Rack Panels utilize a custom machined “CONNECTRIX” System Cutout which combines the popular mounting patterns of the Neutrik® “D” and Switchcraft® “E” series connectors with a generous rectangular cutout that mates with a growing array of adapter-mounted standard connectors.
DURABLE CONSTRUCTION: ACE "CONNECTRIX" System Rack Panels are machined from tough 1/8" (.125") thick Aluminum Alloy (6061-T6) on a dedicated CNC routing machine. Stock Rack Panels are flat, strong, and rigid like typical thinner mild steel panels. As a consequence of the panels being machined and not punched they remain flat and undistorted unlike punched panels which distort in the punching process.
LARGE CONNECTOR CAPACITY: One (1) #RPL-230 "CONNECTRIX" Rack Panel will mount up to 30 "CONNECTRIX" Connectors.
EASY INSTALLATION: Standard "CONNECTRIX" Rack Panels mount with (4) machine screws. Each Rack Panel is CNC machined to precisely mate with the designated connectors and in Standard EIA rack mounting holes.
DURABLE FINISH: Oven cured, semi-gloss, black powder coat.
CUSTOM ENGRAVING: Most Rack Panels provide header space for custom engraving which is fast and easily accomplished on a separate dedicated CNC engraving machine. The finished panels show bright aluminum in the engraved characters and need not be back filled.
CUSTOM PANELS AT A LOWER COST: The “CONNECTRIX” System expands connectivity possibilities by providing more connectors and mounting options in stock ACE Rack Panels. The benefit is fast order turn around and lower cost than a custom punched panel. The look of custom fabricated panels with off-the-shelf stock prices and immediate delivery. |
|
|
|
|
|
FINISHES |
|
|
DURABLE FINISH: Oven cured, semi-gloss, black powder coat finish.
|
|
|
|
|
|
MATERIALS |
|
|
STANDARD PANEL MATERIALS: ACE #RPL-200 Series Rack Panels are made from high strength aluminum alloy (6061-T6) that is .125” thick (1/8").
|
|
|
|
|
|
PACKAGES |
|
|
PACKAGES: ACE #RPL-200 Series Rack Panel Packages were designed to meet customer requests to "package" our most frequently used products into simple, all-in-one, complete "Connectivity" Solutions. The Packages are a sample of some of our most requested Rack Panel and Connector products.
• Package 1 - (1) #RPL-230 Rack Panel with (15) #C-15100 and (15) #C-15111 "CONNECTRIX" Connectors
• Package 2 - (1) #RPL-230 Rack Panel with (15) #C-15109 and (15) #C-25133 "CONNECTRIX" Connectors
• Package 3 - (1) #RPL-230 Rack Panel with (15) #C-25127 and (15) #C-15111 "CONNECTRIX" Connectors
|
|
|
|
|
 |
LINKS |
|
|
|
|
